Share this content on Facebook!
15 Mar 2019
Today I will reveal you how to change the interior lights on a 2014 Toyota 4Runner with extremely power LED replacements bulbs step by step. 
These installments are really simple, it ought to just take about 15 mins with just fundamental tools called for. let's start.

We'll begin with the map lights which you'll require a plastic wedge removal device for to take the lens off. Just pry it into the back of the lens, simply pop that off, and also you'll obtain your OEM T10 light bulb, then you'll take the extremely power T10 canbus LED bulb, insert it straight into the housing, making certain you have a great secure fit and afterwards you'll reinstall the original lens cover back into area. 

Prior to full, you'll intend to check it to make sure you have the bulb inserted correctly. Conform the other side, comply with the same procedure to complete the map light installation.

Proceed to the vanity light area, which comes on when you open up the mirrors. So we'll take our plastic wedge removal tool and function it back via the lens to tear this off to get to the original bulb. 

Yet you can pull out, take your data and Super canbus LED bulb, insert it directly into the outlet. And afterwards we'll reinstall the socket back right into location as well as test the light bulb to ensure that it's working properly.

For the dome light place, we'll take our plastic removal device and also function our method through the factory lens in between the housing as well as lens to stand out off the clips, which are holding it in place and then once the lens is removed. We'll remove the original bulb with our device. 

While original bulb is pulled out, we'll take LED light bulb as well as placed straight into the socket. 
Once it's been installed, you'll intend to check it to make sure that it's working correctly, and afterwards we'll reinstall the lens cover to complete the installation.

For the cargo light locations, you utilize your brightest t10 led plastic wedge device and also insert it into the side of the housing to dispirit a clip so that it comes out of the out of the outlet. Then we'll simply dispirit the clip to draw the housing off the car, make it a bit less complicated to collaborate with. They'll see four clips holding on the lens, which we can utilize the plastic device to kind of work our method around. So we can pop it off less complicated. 

As soon as you've stood out off the lens, you can take the factory light bulb out quickly, take your canbus led bulb and also insert it directly right into the housing. Make sure you have the LED radiating the right way. And see to it it's safely attached, test it by plugging it back in to ensure that you have the proper polarity. After that you'll reinstall your lens cover, ensuring you snap every little thing tightly in position, placing the housing back in and then conform the opposite, following the same steps to complete the installation of the trunk lights.

For the four-door light places, we'll take our plastic wedge tool and insert it on the side of the housing to dispirit a clip to ensure that we get the setting up off the vehicle. We'll draw the housing down, dispirit this clip to take the setting up off the vehicle totally.

We'll press back on the housing to ensure that we can remove this lens setting up, take the OEM bulb out, take our LED replacement bulb, insert it directly into the housing, reinstall the lens cover back on, see to it you break whatever back in position, after that you'll reinstall the setting up back onto the original connector, mount it back onto the automobile, test it to make certain it's working properly and then we'll place it back on the vehicle, break it into location. Comply with the same procedure for all 4 doors to finish the LED setup.

While all point full, you'll have far more usable output in the cabin in the evening along with a great amazing light appearance. Installment only took about 20 mins for the entire vehicle with just a plastic wedge device called for, extremely easy, appropriate?


There isn't any comment in this page yet!

Do you want to be the first commenter?

New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: